Magnetic Drill Bit Pilot Pin (choose size)

This pilot pin or sometimes known as an ejector pin is an essential part of the Magnetic Drill Bit.

The workpiece should be punched with a centre punch, this small indentation is where the pilot pin should be positioned to centre the bit.

The Magnetic Drill Bit then cuts a thin strip of material around the pilot pin creating a perfect hole.

The ejector pin is spring loaded and when the hole is cut the pin springs out and ejects the waste away from the workpiece.

ProWeld advise using a cutting & tapping spray or fluid on the bit.

This will speed-up the drilling but will also prolong the life of the Magnetic Drill Bit.